SLIO

CPU 019PN - 019-CEFPM00

The Smart Control and I/O System

Overview

SLIO CPU 019PN

Ordercode: 019-CEFPM00

  • Powered by SPEED7
  • Work memory [KB]: 6.144
  • Integrated: PROFINET IO Controller / I-Device, PROFIBUS master/slave
  • Interface [2x RJ45]: PROFINET, ModbusTCP master/slave, openCommunication
  • Interface [2x RJ45]: active Ethernet PG/OP communication with DHCP support, switch
  • Interface [2x RS485]: MPI, PtP: ASCII, STX/ETX, 3964(R), USS master, Modbus master/slave
  • OPC UA server / Web server
  • SD card slot with locking, up to 64 expansion modules, configurable with SPEED7 Studio, SIMATIC Manager and TIA Portal

Technical Details

  • Input power supply
  • 24 V
  • Input Voltage
  • x No
  • Current Consumption
  • 1.1 A
  • Max. current drain at backplane bus
  • 3 A
  • Max. current drain load supply
  • 10 A
  • Current consumption from backplane bus
  • x No
  • Current consumption from load voltage L+ (without load)
  • x No
  • Power Loss
  • 7.5 W
  • Number of inputs (digital)
  • x No
  • Rated load voltage (digital)
  • x No
  • Current consumption from load voltage L+ (without load)
  • x No
  • Signal logic input (digital)
  • x No
  • Input characteristic curve (digital)
  • x No
  • Initial data size (digital)
  • x No
  • Number of outputs (digital)
  • x No
  • Rated load voltage (digital output)
  • x No
  • Current consumption from load voltage L+ (without load)
  • x No
  • Signal logic output (digital)
  • x No
  • Output data size (digital)
  • x No
  • Number of inputs (analog)
  • x No
  • Rated load voltage (analog)
  • x No
  • Current consumption from load voltage L+ (without load)
  • x No
  • Voltage inputs (analog)
  • x No
  • Current inputs (analog)
  • x No
  • Resolution in bit
  • x No
  • Measurement principle
  • x No
  • Basic conversion time
  • x No
  • Initial data size
  • x No
  • Number of outputs (analog)
  • x No
  • Output voltage ranges
  • x No
  • Output current ranges
  • x No
  • Resolution in bit (analog)
  • x No
  • Conversion time (analog)
  • x No
  • Output data size (analog)
  • x No
  • Number of counters
  • x No
  • Counter width
  • x No
  • Maximum input frequency
  • x No
  • Maximum count frequency
  • x No
  • Maximum count frequency
  • x No
  • Maximum count frequency
  • x No
  • Maximum count frequency
  • x No
  • Number of channels
  • x No
  • Input voltage (rated value)
  • x No
  • Power stage
  • x No
  • PWM frequency
  • x No
  • Type of encoder
  • x No
  • Encoder frequency
  • x No
  • Encoder resolution (internal)
  • x No
  • Control type
  • x No
  • Terminal voltage max.
  • x No
  • Terminal current max.
  • x No
  • Total current per module, max.
  • x No
  • Number of clamps
  • x No
  • Binding of potential
  • x No
  • Point-to-point protocol
  • ASCII protocol, STX/ETX protocol, 3964(R) protocol, USS master protocol, Modbus master protocol, Modbus slave protocol
  • Encoder Supply: Number of outputs (L+n)
  • x No
  • Rated output current
  • x No
  • Port mode
  • x No
  • Load memory, integrated
  • 6000 kB
  • Work memory, integrated
  • 6000 kB
  • Work memory, maximal
  • 6000 kB
  • Memory card slot
  • SD/MMC-Card with max. 2 GB
  • Racks, max.
  • 5
  • Modules per rack, max.
  • 64 minus number line extensions
  • Fieldbus
  • x No
  • Connector
  • x No
  • Topology
  • x No
  • Transmission speed, max.
  • x No
  • Address range inputs, max.
  • x No
  • Address range outputs, max.
  • x No
  • Material
  • PPE / PPE GF10
  • Mounting
  • Profile rail 35 mm
  • Dimensions Weight
  • 131.5 mm
  • Dimensions Height
  • 109 mm
  • Dimensions Depth
  • 83 mm
  • Net weight
  • 335 g
  • Gross weight
  • 365 g
  • Certifications
  • UL certification, ChinaRoHS certification
  • Safety protocol
  • x No
  • Safety requirements
  • x No
  • Circuit monitoring
  • x No
  • Operating temperature Max
  • 60 °C
Processing... Enter name, description, product or keywords Showing _START_ – _END_ / _TOTAL_ records filtered from _MAX_ records No records No records First Last Sort ascending Sort descending

Downloads

Name
CPU 019PN - 019-CEFPM00
Datenblatt für SLIO CPU 019PN Data sheet | German
Data sheet German
CPU 019PN - 019-CEFPM00
Datasheet for SLIO CPU 019PN Data sheet | English
Data sheet English
CPU 019-CEFPM00 - SPEED7 CPU 019PN
Rev. 22-30 || SLIO SPEED7 CPU 019PN || HW: 01 | CPU-FW: V3.0.9 | CP-FW: V2.6.3 Technical documentation | German
Technical documentation German
CPU 019-CEFPM00 - SPEED7 CPU 019PN
Rev. 22-30 || SLIO SPEED7 CPU 019PN || HW: 01 | CPU-FW: V3.0.9 | CP-FW: V2.6.3 Technical documentation | English
Technical documentation English
CPU 01x - SPEED7 - Operation list
Rev. 24-02 || SLIO Instructions, OBs, SFBs, FBs, SFCs, VIPA specific blocks, System Status List SSL Technical documentation | English
Technical documentation English
CPU 01x - SPEED7 - Operationsliste
Rev. 24-02 || SLIO Befehlsliste, OBs, SFBs, FBs, SFCs, VIPA spezifische Bausteine, Systemzustandsliste SZL Technical documentation | German
Technical documentation German
Produktlaunch 019-CEFPM00
Produktlaunch 019-CEFPM00 Brochures | German
Brochures German
Product Launch 019-CEFPM00
Product Launch 019-CEFPM00 Brochures | English
Brochures English
System guide - Industrial IT Security
Rev. 21-12 || Guide Industrial Security in Information Technology Technical documentation | English
Technical documentation English
Systemleitfaden - Industrielle IT-Sicherheit
Rev. 21-12 || Leitfaden Industrielle Sicherheit in der Informationstechnologie Technical documentation | German
Technical documentation German
System SLIO - Liste der Stromaufnahmen
Rev. 22-40|| SLIO Liste der Stromaufnahmen der System SLIO Module Technical documentation | German
Technical documentation German
System SLIO - List of current consumptions
Rev. 22-40 || SLIO List of the current consumptions of the System SLIO modules Technical documentation | English
Technical documentation English
System SLIO - Kompatibilitätsliste
Rev. 24-25 || SLIO System SLIO CPUs, System SLIO IMs, Taktsynchronität Technical documentation | German
Technical documentation German
System SLIO - Compatibility list
Rev. 24-25 || SLIO System SLIO CPUs, System SLIO IMs, Isochronous mode Technical documentation | English
Technical documentation English
EU-Declaration of Conformity - SLIO
state: 03.03.2020 Certification | German, English
Certification German, English
019-CEFPM00_A1_V03_00_13_00.zip
Firmware for PLC System SLIO (CPU 019-CEFPM00) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | English
Firmware English
EU-Declaration of Conformity - SLIO
state: 25.07.2024 Certification | English, German
Certification English, German
UK-Declaration of Conformity - SLIO
state: 25.07.2024 Certification | English
Certification English
UL SLIO
SLIO CPU014, CPU015PN, CPU015N, CPU017PN, CPU 019 PN Certification | English
Certification English
YASKAWA Controls MTBF Technical documentation | English Technical documentation English
3D-Data SLIO CPU 015 017 019
SLIO CPU 4x RJ45 2x RS485 including Power Module CAD/CAE | English, German
CAD/CAE English, German
019-CEFPM00_A1_V03_00_13_01.zip
Firmware for PLC System SLIO (CPU 019-CEFPM00) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | English
Firmware English
019-CEFPM00_A1_V03_00_16_00.zip
Firmware for PLC System SLIO (CPU 019-CEFPM00) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | English
Firmware English
GSDML File for the SLIO-PLC
Configuration file for the VIPA-SLIO-CPU's 013C/014/015/017/019 Settings file | English
Settings file English
GSDML File for the SLIO-PLC - I-Device-Function
Configuration file for SLIO I-Device-Function Settings file | English
Settings file English
019-CEFPM00_A1_V03_00_20_00.zip
Firmware for PLC System SLIO (CPU 019-CEFPM00) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | English
Firmware English
Yaskawa System Slio | ChinaRoHS Certification | Certification
SLIO Labeling Stripes
To print approximately the same labeling stripes as the original, it is best to use chromosulphate board with 300g sheet weight. Technical documentation | English
Technical documentation English
System SLIO Ersatzteile Technical documentation | German Technical documentation German
System SLIO Spare Parts Technical documentation | English Technical documentation English
Broschüre SLIO - Das dezentrale I/O-System
SLIO (= Sliced I/O) ist ein modular aufgebautes und kompaktes, dezentrales I/O-System. Es ist nicht nur mit unseren eigenen, sondern auch mit den meisten Steuerungssystemen anderer Hersteller universell kombinierbar. Brochures | German
Brochures German
Brochure SLIO - The decentralized I/O system
SLIO (= sliced I/O) is a modular and extremely compact, decentralized I/O system. It can be universally combined and deployed with each of our established systems and nearly all those of other producers. Brochures | English
Brochures English

Use Cases